 |
|
| |
Reach
CLI by email |
|
| |
|
|
| |
 |
|
| |
|
|
| |
Contact
CLI
Call
Andre Harvey for a price quote today. CLI is definitely a "can-do" company. |
|
| |
|
|
| |
Telephone: |
|
| |
CA
- 888-295-6100 |
|
| |
CO
- 800. 524.8672 |
|
| |
TX - 888. 546.4641 |
|
| |
|
|
| |
online:
Request Form |
|
|
|
 |
|
| |
|
|
| |
PDFs
available online: |
|
 |
Fixed
Baffle Curtain (288KB) |
|
|
Floating
Baffle Curtain (857KB) |
|
 |
Floating
Baffle Curtain Termination (338KB) |
|
|
Tank
with and without (923KB) |
|
|
Lagoon
with and without (883KB) |
|
|
Floating
Covers review
design points of a floating methane cover.
(876KB) |
|
| |
|
|
| |
Experience
counts -
It is in our on-going commitment to both quality in our products
and exceptional service. |
|
| |
|
|
| |
CLIENT
LIST |
|
| |
Morton
Salt; Newark, CA
(baffle) 36 mil Hypalon - 26,000 sf |
|
| |
 |
|
| |
Easton
WTP; Easton, PA
(floating cover) 45 mil Hypalon - 76,900 sf |
|
| |
|
|
| |
Coachelle
Valley Water Rec Plant; Palm Desert, CA
(floating cover) 45 mil Hypalon - 69,404 sf |
|
| |
|
|
| |
City
of Almogorodo; Almogorodo, NM
(floating cover) 45 mil RMPE - 250,000 sf |
|
| |
|
|
| |
Corvallis;
Corvallis, OROR
(floating cover) 30 mil RPP - 70,400 sf |
|
| |
|
|
| |
This
is a partial list.* |
|
| |
|
|
|
| |
|
|
| |
Flexible
Membrane Floating Covers: |
|
| |
Flexible
membrane floating covers have been performing well for over 20 years.
The
low initial cost and easy upkeep of a floating cover makes them
a very practical choice for potable or wastewater liquid storage
and a strong asset in
tandem with a flexible membrane liner under the cover.
|
|
| |
|
|
| |
Advantages
to an Enclosed System: |
|
 |
Cleaner
Water — the liquid is completely encapsulated by geomembrane,
keeping it consistently cleaner. |
|
| |
|
|
|
Greater
Chemical Stability — the liquid is kept more chemically stable
- for potable water, this means less chlorine use. |
|
| |
|
|
|
Contain
Odors —
keeps wastewater 'odors' out of the surrounding environment. |
|
| |
|
|
| |
Consider
Design: |
|
| |
There
are several different design "types", however, the most
common design in use is the Defined Sump, Tensioned Plate.
Pioneered by Burke Industries (Burke/Mercer), of San Jose, CA. |
|
| |
|
|
| |
How
it works: |
|
|
Place
the cover material in the bottom of the reservoir, tank or cell and
attach it to any structures. |
|
| |
|
|
|
Place
sand tube weights down the center of the of the containment structure
and out into the corners.
|
|
| |
|
|
| |
 |
These weights will force all of the 'slack' (when
the cover rises with the water) into sumps, which will also
capture and help drain off rain water later. |
| |
|
|
The
weights cause the cover 'plates' to be in tension forcing the
rain water to the sumps as well as allowing you to walk all
over the covered area. |
| |
|
|
Covered
foam floats are added parallel to the weights just outboard
of the sump area for safety and other places for common walkways. |
| |
|
|
Access
hatches, air vents, and sump pumps are added into the design
criteria as needed. |
|
|
| |
|
|
|
Life
expectancy of this cover exceeds 20 years. |
|
| |
|
|
| |
Consider
Installation
—
|
|
| |
Construction
of a floating cover is a craft. Experience, ability and pride of workmanship
are all key ingredients along with certified technical ability and
a commitment to Quality Control. |
|
| |
|
|
| |
Maintenance
— |
|
| |
Although
overall maintenance is low, we advocate routine inspections and
periodic cleaning.
(the
amount of time between cleanings is dependent upon the cover's location.)
|
|
| |
|
|
| |
CLI
offers inspection and maintenance services at competitive prices.
Contact us. |
|
| |
|
| |
Floating
Covers
Review design points of
a floating methane cover in .pdf
|
| |
|
|
|
COVERS
