Clay
Liners are reinforced composites which combine two durable geotextile
outer layers with a uniform core of natural sodium bentonite clay
to form a very thin, tight hydraulic layer. In covered environmental
applications, this material is utilized as an efficient and cost effective
replacement for conventional compacted clay with long term performance
in harsh environmental conditions.
Available
in large rolls to expedite installation.
Increased
containment volume - significantly reduces the required thickness
of compacted clay liners.
Superior
hydraulic conductivity.
High
shear resistance.
Greater
installation durability and ease of maintenance.
Minimum
air space requirements. Since the clay liner can function when
only an inch thick, it increases available air space.
Long-term
performace in harsh environmental conditions.
USES:
Consider
a Clay Liner for:
composite
linings
secondary
containment
liquid
containment
canals
surface
impoundments
Composite
Linings: Bentomat® Clay Liners
can completely or partially replace thick, multilift compacted
clay layers in composite landfill liners and caps due to the
efficiency of the high swelling natural sodium bentonite clay.
Secondary
Containment: Bentomat® are excellent
for secondary containment barriers in aboveground tank farms
due to the ease of installation and virtually effortless pipe
penetration construction.
Liquid
Containment and Canals: Bentomat®
provides exceptional liquid containment in reservoirs and irrigation
canals, as well as industrial ponds and lagoons, due to their
low permeability and high internal shear strength.
Caps
and Closures: Bentomat® GCLs are
ideally suited for use in landfill caps and closures. Used alone
or in conjunction with a geomembrane, these GCLs are resistant
to the deleterious effects of differential settlement and seasonal
temperature fluctuations.
DESIGN
NOTES:
Clay
Liners are available under the product name Bentomat®
CLT (manufactured by CETCO.)
The
Bentomat® needlepunching
process consistently reinforces the bentonite layer with thousands
of high tenacity fibers that resist and transfer the shearing
stresses into the encapsulating geotextiles.
The
uniform confinement provided by the fibers from this process
resist lateral migration of the bentonite clay within the
Bentomat® - in either a dry or hydrated
state.
The
needlepunched fibers are more durable over a wider range of
installation conditions and greatly reduce the adverse effects
of premature hydration during installation.
With
Bentomat®, the clay component is
no longer the limiting factor on side slopes. You can replace
compacted clay layers on steep side slopes and be assured
of low permeability without sacrificing slope stability. The
inherent confining stress from the needlepunching also improves
the hydraulic properties under low confining stress applications.
Disclaimer:
These guidelines are for informational purposes only and are
intended as illustration or general information only and are
not intended as a guarantee or warranty. Colorado Lining International
assumes no responsibilities in connection with the use of this
information.